Fabricators Forum

Three sided coved top

Kevin Raney — Tue, 29 Sep 2009 17:07:39 GMT

How do I glue up a coved backsplash and two endsplashes using a coving router on the verticle without tearing or blowing out material. Am I supposed to turn the router on its side or is there a better way.

wavy bit

jeff — Tue, 15 Sep 2009 19:45:06 GMT

What is the recommended rpm for the wavy bit

Solid Surface Sinks

Robert Bippes — Tue, 15 Sep 2009 16:48:06 GMT

I was wondering if anyone has come up with a way of finishing (routing and sanding) solid surface sink bowls proficiently. I use a series of three bits to cut the sinks out and round them over, but it seems like I am spending way too much time getting the lip/step between the countertop surface and the sink bowl sanded out. Is there a better bit that can cut closer so sanding is minimal?

Corian Nocturne (solid black)

Monte Chase — Tue, 04 Aug 2009 21:14:19 GMT

I am looking for pieces of Corian Nocturne (solid black),
Minimum 8" X 8" and 15" X 15" pieces.

If anyone has drops for sale please contact,

Monte Chase
114 West Main St
Mandan, ND 58554
701-663-0453

sanding solid surface

don — Fri, 05 Jun 2009 14:14:40 GMT

I am looking for some documentation on solid surface sanding. Particularly, wet vs dry. I would like to know what the general consensus is on the subject as far as which one is faster. I was under the impression that dry sanding is faster but when working in someones home refurbishing tops the wet is much more cleaner, virtually no dust. Also when a high gloss is desired I feel the wet sanding will produce a much more desireable finish. Anyone have any input on this?

Pinske Drawer Notcher-great Machine

Dave — Thur, 30 Apr 2009 01:24:11 GMT

I bought the Pinske Drawer Notcher to cut the notches needed for the Blum Tandem and Motion slides..and other brands for that matter. It does a fantastic job. However...I am getting out of the business and need to sell it and a full set of Solid Surface Fabrication and Quartz installation tools. Email me if you are interested in a list and pricing. All in like new condition.

Inlay material

Bill Moore — Tue, 03 Mar 2009 20:11:34 GMT

I am looking for an acrylic liquid inlay for doing some CNC carvings in solid surface. I have tried inlace but it is too soft and since it is polyester I am afraid to try inlaying V-carvings. I know the adhesives would stay in the grooves forever but they are too transparent. I thought of adding a dye like the inlace and try to figure a way to thin it. The only thing I have found is $125 for 500grams OUCH! Hope someone can help.
Thanks
Bill Moore

wilsonart solid surface repair

ron — Mon, 02 Mar 2009 20:04:53 GMT

Has anyone attempted to repair a 1/16'' to 1/8" deep groove/gash on a solid surface counter top? Any Suggestion for a DIY'er would be appreciated. Thanks

How to combat Lowes abuse of fabricator

Aria Sharifi — Sun, 14 Dec 2008 19:25:43 GMT

We would like to know other opinions on Lowes Fabricators regarding Lowes demand on low pricing and abusing of their position in the market of charging back fabricators for their own employees short coming of, sealing solid surface with wrong representation, and If the customer not satisfied with their service, they refund the money and simply charging the fabricator, and if you complain, they simply threatening to cut you off, so you lose your investment on their store.

Wilson wheel tools for Trumpf

Ted — Mon, 08 Dec 2008 15:42:35 GMT

Has any one used the Wilson wheel tools rolling rib, shear, pincher and offset tools I hasve a need for one but don't know much about them

Thanks Ted

LG HI-MACS

jeff — Thur, 04 Dec 2008 15:17:24 GMT

I just want to make sure I do my edge right. Top side to top side and bottom to bottom right? Or does it not matter with LG product

Shower pan

Travis — Mon, 17 Nov 2008 19:40:43 GMT

I have a shower surround to do. I noticed the shower drian is 2" to close to the wall for a standard 36" base. The customer has considered breaking out the concrete and moving the drain but I think making a pan out of ss would be an easier way to go. I realize you sell pans but I think it is a project I could swing with some basic tips. Can you help me out ?

concerns.
1. How much slope do I need to have for drainage
2. ss is kinda slippery when wet, how do you address this?
3. support under the pan? I considered just pouring thin set on the floor and setting the pan while still wet to form to the underside.
4. Obviously there will be a seem in a 36" pan. With thinset mortor underneath do I need a seem plate?

fabricator/installer

john dino — Sat, 08 Nov 2008 21:34:35 GMT

i have 17 years work experienced in solid surfacing products (fabricating & installing) at present residing here in europe.i'm planning to move in the USA therefore i am looking for a company who can hire me....pls email me. johndinosicat@libero.it

V Groover

Steve — Fri, 07 Nov 2008 21:38:13 GMT

2006 AVG Single head, Universal V-Groover for sale. Model AVG-48-CC-FT. $60,000, plus any applicable sales tax FOB: El Monte, CA

Scribe set-up for coved sidesplashes

Randy — Thur, 28 Aug 2008 19:21:57 GMT

Obviously I'm a rookie ,I understand doing the back wall but am not comprehending the intigrated sidesplashes .will someone please school me on this.     Thanks much !!!
         looking forward to a response

                                                                 Randy the Rookie